ONE TRACK
La géolocalisation pour tous
ONE TRACK
La géolocalisation pour tous
ONE TRACK 1
Coupure à distance
IP 65
Protection de la batterie
Tension nominale 9-90V
Détection ACC
Alertes multiples
Moto
Véhicule
Flotte
ONETRACK 2
coupure à distance
Bouton SOS (En option)
Analyse de conduite
GPS + INS Tracking
Installation fléxible
Erreur kilomètrique < 2%
Alertes multiples
Détection d'allumage
Assurance
Leasing
Flotte
ONETRACK 3
4G + 3G + 2G + Wifi + Bluetooth
Bouton panique SOS
Camera double
Cloud video
Blocage de sim
Coupure à distance
GPS Tracking
Open I/O OBD/CANBUS/RS232
Analyse conducteur
Live streaming
OTA + Cloud
Android
ONE TRACK NANO
Coupure à distance
IP 65
Protection de la batterie
Tension nominale 9-90V
Détection ACC
Alertes multiples
Moto
Véhicule
Flotte
ONETRACK PRO
coupure à distance
Bouton SOS (En option)
Analyse de conduite
GPS + INS Tracking
Installation fléxible
Erreur kilomètrique < 2%
Alertes multiples
Détection d'allumage
Assurance
Leasing
Flotte
ONETRACK PRO MAX
4G + 3G + 2G + Wifi + Bluetooth
Cloud video
GPS Tracking
Live streaming
Bouton panique SOS
Blocage de sim
Open I/O OBD/CANBUS/RS232
OTA + Cloud
Camera double
Coupure à distance
Analyse conducteur
Android
ONE TRACK 1
Coupure à distance
IP 65
Protection de la batterie
Tension nominale 9-90V
Détection ACC
Alertes multiples
Moto
Véhicule
Flotte
ONETRACK 2
coupure à distance
Bouton SOS (En option)
Analyse de conduite
GPS + INS Tracking
Installation fléxible
Erreur kilomètrique < 2%
Alertes multiples
Détection d'allumage
Assurance
Leasing
Flotte
ONETRACK 3
4G + 3G + 2G + Wifi + Bluetooth
Bouton panique SOS
Camera double
Cloud video
Blocage de sim
Coupure à distance
GPS Tracking
Open I/O OBD/CANBUS/RS232
Analyse conducteur
Live streaming
OTA + Cloud
Android
Paramètre | Description |
---|---|
Alarm | Alarm status: |
0: normal | |
1: SOS | |
2: Power Cut Alarm | |
3: Vibration Alarm | |
4: Fence In Alarm | |
5: Fence Out Alarm | |
6: Over-speed Alarm | |
9: Moving Alarm | |
41: Harsh acceleration alarm | |
42: Sharp Left Turn | |
43: Sharp Right Turn | |
48: Harsh deceleration alarm | |
Alarm_statuts | Alarm status: |
0: normal | |
1: Shock Alarm | |
2: Power Cut Alarm | |
3: Low Battery Alarm | |
4: SOS | |
Mcc | Mobile Country Code |
Mnc | Mobile Network Code |
Lac | Location Area Code |
Lac | Location Area Code |
cell_id | Cell Tower ID |
voltage | Voltage degree 0-6: |
0: Lowest power and power off | |
1: No enough power to dial a call or send messages. | |
2: Low power and alarm | |
3: Lower power but can work normally | |
3~6: Work in good condition | |
gsm | GSM signal strength degree |
alm1 | Bitwise parameter (1 - ON, 1 - OFF): |
bit1 - SMS Alarm | |
bit2 - Phone Alarm | |
bit3 - Network Alarm | |
bit4 - Displacement Alarm | |
bit5 - SMS Alarm | |
bit6 - Phone Alarm | |
bit7 - Network Alarm | |
bit8 - Vibration Alarm | |
alm2 | Bitwise parameter (1- ON, 0 - OFF): |
bit1 - SMS Alarm | |
bit2 - Phone Alarm | |
bit3 - Network Alarm | |
bit4 - Low Battery Alarm | |
bit5 - SMS Alarm | |
bit6 - Phone Alarm | |
alm3 | Bitwise parameter (1- ON, 0 - OFF): |
bit1 - SMS Alarm | |
bit2 - Phone Alarm | |
bit3 - Network Alarm | |
bit4 - Power Off Alarm | |
sta1 | Bitwise parameter (1- ON, 0 - OFF): |
bit1 - Disassembly Alarm Status | |
bit2 - Disassembly | |
bit5 - Remotely Disarm | |
bit6 - Manually Arm | |
bit7 - Automatically Arm | |
bit8 - Arm Status | |
dyd | Fuel/Electricity, Cutoff Status ( 1 - Valid, 0 - Invalid): |
bit1 - Oil/Electricity connection | |
bit2 - Oil/Electricity cutoff | |
bit3 - Deferred execution caused by GPS unlocated | |
bit4 - Deferred execution caused by overspeed | |
sos_numN | bit7 - Automatically Arm |
sos_numN | |
SOS number | |
sos_numN | SOS number |
center_num | Center number |
fence | Fence |
Paramètre | Description |
---|---|
Alarm | Alarm status: |
0: normal | |
1: SOS | |
2: Power Cut Alarm | |
3: Vibration Alarm | |
4: Fence In Alarm | |
5: Fence Out Alarm | |
6: Over-speed Alarm | |
9: Moving Alarm | |
41: Harsh acceleration | |
42: Sharp Left Turn | |
43: Sharp Right Turn | |
48: Harsh Brake | |
Alarm_statuts | Alarm status: |
0: normal | |
1: Shock Alarm | |
2: Power Cut Alarm | |
3: Low Battery Alarm | |
4: SOS | |
Mcc | Mobile Country Code |
Mnc | Mobile Network Code |
Lac | Location Area Code |
Lac | Location Area Code |
cell_id | Cell Tower ID |
voltage | Voltage degree 0-6: |
0: Lowest power and power off | |
1: No enough power to dial a call or send messages. | |
2: Low power and alarm | |
3: Lower power but can work normally | |
3~6: Work in good condition | |
gsm | GSM signal strength degree |
acc | ACC Status. ACC low: 0, ACC high: 1 |
ubi_kind | UBI Kind 0~2, 0=none, 1=UBI event, 2=UBI alarm |
ubi_on | UBI_On: 0~8 |
1 - Harsh acceleration | |
2 - Harsh brake | |
3 - Harsh lane switching | |
4 - Sharp turn | |
5 - Collision | |
6 - Vehicle stability | |
7 - Rollover | |
8 - Abnormal attitude |
Paramètre | Description |
---|---|
Alarm | Alarm status: |
1: SOS alarm | |
9:displacement alarm | |
128: vibration alarm | |
129:Excess data traffic alarm | |
130:Device reboot | |
131:collision alarm | |
132: forward camera abnormal | |
133: inward camera abnormal | |
134:SD card can’t be identified | |
135:overspeed alarm | |
136:power off alarm | |
137: no inward camera | |
138:Enable power/oil cutoff alarm | |
139:Disable power/oil cutoff alarm | |
144: harsh acceleration alarm | |
145: harsh deceleration alarm | |
146:sharp turn alarm | |
147: collision alarm | |
Mcc | Mobile Country Code |
Mnc | Mobile Network Code |
Lac | Location Area Code |
cell_id | Cell Tower ID |
voltage_lvl | The range is 0~6 defining the voltage is from low to high. |
0: No Power (shutdown) | |
1: Extremely Low Battery | |
2: Very Low Battery | |
3: Low Battery | |
4: Medium | |
5: High | |
6: Very High | |
gsm | GSM Signal Strength Levels |
0: no signal; | |
1: extremely weak signal; | |
2: very weak signal; | |
3: good signal; | |
4: strong signal. | |
tr_status | Bitmask representing different terminal statuses. |
Bit7 | |
1:Oil/Electricity cutoff | |
0:Oil/Electricity on | |
Bit6 | |
0: GPS tracking is off | |
1: GPS tracking is on | |
Bit3~Bit5 | |
Extended bit | |
Bit2 | |
0: Charge Off | |
1: Charge On | |
Bit1 | |
1: ACC high | |
0: ACC Low | |
Bit0 | |
0: Disarm | |
1:Arm | |
acc | 1: ACC high |
0: ACC Low | |
up_mode | Data Upload Mode: |
(could be only one mode available) | |
0 upload by time interval | |
1 upload by distance | |
2 upload for corner correction | |
3 upload by ACC status change | |
4 Re-upload last valid locating point after shift from dynamic motion to static position | |
5 Report last valid locating point after network reconnected. | |
6 Update the ephemeris to upload locating point. | |
7 Press to upload locating point | |
8 Power on to upload locating point | |
9 Power on and change locating point by GPS based station. |
Paramètre | Description |
---|---|
Alarm | Alarm status: |
0: normal | |
1: SOS | |
2: Power Cut Alarm | |
3: Vibration Alarm | |
4: Fence In Alarm | |
5: Fence Out Alarm | |
6: Over-speed Alarm | |
9: Moving Alarm | |
41: Harsh acceleration alarm | |
42: Sharp Left Turn | |
43: Sharp Right Turn | |
48: Harsh deceleration alarm | |
Alarm_statuts | Alarm status: |
0: normal | |
1: Shock Alarm | |
2: Power Cut Alarm | |
3: Low Battery Alarm | |
4: SOS | |
Mcc | Mobile Country Code |
Mnc | Mobile Network Code |
Lac | Location Area Code |
Lac | Location Area Code |
cell_id | Cell Tower ID |
voltage | Voltage degree 0-6: |
0: Lowest power and power off | |
1: No enough power to dial a call or send messages. | |
2: Low power and alarm | |
3: Lower power but can work normally | |
3~6: Work in good condition | |
gsm | GSM signal strength degree |
alm1 | Bitwise parameter (1 - ON, 1 - OFF): |
bit1 - SMS Alarm | |
bit2 - Phone Alarm | |
bit3 - Network Alarm | |
bit4 - Displacement Alarm | |
bit5 - SMS Alarm | |
bit6 - Phone Alarm | |
bit7 - Network Alarm | |
bit8 - Vibration Alarm | |
alm2 | Bitwise parameter (1- ON, 0 - OFF): |
bit1 - SMS Alarm | |
bit2 - Phone Alarm | |
bit3 - Network Alarm | |
bit4 - Low Battery Alarm | |
bit5 - SMS Alarm | |
bit6 - Phone Alarm | |
alm3 | Bitwise parameter (1- ON, 0 - OFF): |
bit1 - SMS Alarm | |
bit2 - Phone Alarm | |
bit3 - Network Alarm | |
bit4 - Power Off Alarm | |
sta1 | Bitwise parameter (1- ON, 0 - OFF): |
bit1 - Disassembly Alarm Status | |
bit2 - Disassembly | |
bit5 - Remotely Disarm | |
bit6 - Manually Arm | |
bit7 - Automatically Arm | |
bit8 - Arm Status | |
dyd | Fuel/Electricity, Cutoff Status ( 1 - Valid, 0 - Invalid): |
bit1 - Oil/Electricity connection | |
bit2 - Oil/Electricity cutoff | |
bit3 - Deferred execution caused by GPS unlocated | |
bit4 - Deferred execution caused by overspeed | |
sos_numN | bit7 - Automatically Arm |
sos_numN | |
SOS number | |
sos_numN | SOS number |
center_num | Center number |
fence | Fence |
Paramètre | Description |
---|---|
Alarm | Alarm status: |
0: normal | |
1: SOS | |
2: Power Cut Alarm | |
3: Vibration Alarm | |
4: Fence In Alarm | |
5: Fence Out Alarm | |
6: Over-speed Alarm | |
9: Moving Alarm | |
41: Harsh acceleration | |
42: Sharp Left Turn | |
43: Sharp Right Turn | |
48: Harsh Brake | |
Alarm_statuts | Alarm status: |
0: normal | |
1: Shock Alarm | |
2: Power Cut Alarm | |
3: Low Battery Alarm | |
4: SOS | |
Mcc | Mobile Country Code |
Mnc | Mobile Network Code |
Lac | Location Area Code |
Lac | Location Area Code |
cell_id | Cell Tower ID |
voltage | Voltage degree 0-6: |
0: Lowest power and power off | |
1: No enough power to dial a call or send messages. | |
2: Low power and alarm | |
3: Lower power but can work normally | |
3~6: Work in good condition | |
gsm | GSM signal strength degree |
acc | ACC Status. ACC low: 0, ACC high: 1 |
ubi_kind | UBI Kind 0~2, 0=none, 1=UBI event, 2=UBI alarm |
ubi_on | UBI_On: 0~8 |
1 - Harsh acceleration | |
2 - Harsh brake | |
3 - Harsh lane switching | |
4 - Sharp turn | |
5 - Collision | |
6 - Vehicle stability | |
7 - Rollover | |
8 - Abnormal attitude |
Paramètre | Description |
---|---|
Alarm | Alarm status: |
1: SOS alarm | |
9:displacement alarm | |
128: vibration alarm | |
129:Excess data traffic alarm | |
130:Device reboot | |
131:collision alarm | |
132: forward camera abnormal | |
133: inward camera abnormal | |
134:SD card can’t be identified | |
135:overspeed alarm | |
136:power off alarm | |
137: no inward camera | |
138:Enable power/oil cutoff alarm | |
139:Disable power/oil cutoff alarm | |
144: harsh acceleration alarm | |
145: harsh deceleration alarm | |
146:sharp turn alarm | |
147: collision alarm | |
Mcc | Mobile Country Code |
Mnc | Mobile Network Code |
Lac | Location Area Code |
cell_id | Cell Tower ID |
voltage_lvl | The range is 0~6 defining the voltage is from low to high. |
0: No Power (shutdown) | |
1: Extremely Low Battery | |
2: Very Low Battery | |
3: Low Battery | |
4: Medium | |
5: High | |
6: Very High | |
gsm | GSM Signal Strength Levels |
0: no signal; | |
1: extremely weak signal; | |
2: very weak signal; | |
3: good signal; | |
4: strong signal. | |
tr_status | Bitmask representing different terminal statuses. |
Bit7 | |
1:Oil/Electricity cutoff | |
0:Oil/Electricity on | |
Bit6 | |
0: GPS tracking is off | |
1: GPS tracking is on | |
Bit3~Bit5 | |
Extended bit | |
Bit2 | |
0: Charge Off | |
1: Charge On | |
Bit1 | |
1: ACC high | |
0: ACC Low | |
Bit0 | |
0: Disarm | |
1:Arm | |
acc | 1: ACC high |
0: ACC Low | |
up_mode | Data Upload Mode: |
(could be only one mode available) | |
0 upload by time interval | |
1 upload by distance | |
2 upload for corner correction | |
3 upload by ACC status change | |
4 Re-upload last valid locating point after shift from dynamic motion to static position | |
5 Report last valid locating point after network reconnected. | |
6 Update the ephemeris to upload locating point. | |
7 Press to upload locating point | |
8 Power on to upload locating point | |
9 Power on and change locating point by GPS based station. |